![]() ![]() I hope this was helpful and your wood tower components are really slippery. Remember you can make it a bit more than those dimensions as you will sand it down and then add a finish to the complete set. The whole product including box and game instructions comes in at 2.2 pounds. The weight should be ok if you are using pine but if you want the original weight it is 10.6875g. You just have to cut 54 wooden blocks to this size. If you decide you want to make the game yourself it is not that difficult. Lots of cool ideas came like this, some people even make truth or dare Jenga, this is fun but it is not going to change how challenging the actual game is. Maybe have something like, pull another block, or stack on top of the Jenga tower with your left hand. When someone pulls out a piece they must do what is on the block. If you are looking to make the game more difficult, take it to the next level. In all would I recommend doing this to your Jenga game? I would only do it if you are tired of the current game and want to try something new. Stacking them in a tower can be completely harder. However it may not be as challenging since the blocks are slick pulling them out will be very easy. Once you have completed the steps above it will totally change the Jenga game. Will Slippery Blocks make Jenga more Challenging Once the second coat dries it’s time for the party, grab a table and show off your skills. You can do this and let it dry, adding 2 coats in total is best for the wooden blocks. When applying the finish try not to have any of it clumped together, it should all be spread out. This will help the blocks look natural, make sure to do thin long strokes with the brush and go with the grain. Next, we take the sanded Jenga block and apply stain to the wood with Polyurethane. Keep repeating per block till all the wood surface is extremely fine. Keep in mind you will have to sand down all 54 blocks once you start until you can play the game again. You can use sandpaper from 80 – 100 grit. Let’s first make the surface smooth by sanding the Jenga blocks so they are no longer rough.
0 Comments
Leave a Reply. |